01 — Sizing

Choosing the right system

A kit that is too small disappoints, and a kit that is too large wastes money. These four answers cover most of it.

How do I choose the right kit size?

Start with your last 12 months of usage in kWh, not the dollar amount. A US array produces roughly 1,400 kWh per installed kW per year, so a 900 kWh month needs about 8 kW. The calculator does this for you, and we check the number against three months of bills before you order.

What size do most homes need?

Most single-family homes we quote land between 7kW and 12kW. A small home or cabin can be served by the 3kW or 5kW kit, while all-electric homes with heat pumps and EV charging usually need 12kW or more.

Can I add a battery later?

Hybrid and off-grid kits are specified with storage in mind. Adding a battery later depends on the inverter in your kit: it must be storage-capable and the battery must be on its approved list. Tell us at quote stage if a battery is coming, even if it is a year away.

What if my roof is too small or shaded?

A ground mount or a smaller array may be the better answer. Send roof photos and we will tell you honestly when a kit does not fit. We would rather lose the sale than ship an array that underperforms for 25 years.

02 — The crate

What is included, and what is not

A kit price buys equipment. It does not buy labour, permits or freight, and the page for each kit says exactly which panels and inverter you receive.

What exactly ships in a kit?

Panels, the inverter specified on the kit page, engineered racking and clamps, DC and AC wiring, connectors, disconnects where included, a bill of materials and an installation guide. Each kit page lists the exact panel count and inverter for that size.

What is not included in the kit price?

Unless the kit page says otherwise: batteries, installation labour, permits, utility fees, shipping, and any electrical panel upgrade or trenching your site needs. Those are quoted separately so you can see the real total.

Are the panels and inverters UL listed?

Yes. Panels are UL 61730 and IEC 61215 listed, and inverters are UL 1741 certified with rapid-shutdown compliance. Certificates are available for your permit package on request.

Do I need to buy specialist tools?

Most kits go together with standard hand tools plus a torque wrench, MC4 crimpers and a multimeter. The installation guide lists the specialty tools and the torque values the inspector will look for. Hire or borrow rather than buy where you can.

03 — Delivery

Shipping and receiving

Panels travel in reinforced crates on a freight truck. Knowing what to do at the curb is the difference between a smooth delivery and a claim.

Where do you ship and how long does delivery take?

We ship to the contiguous United States. In-stock kits are picked and crated in 2 to 5 business days, then freight transit is typically 3 to 7 business days. Alaska, Hawaii and island addresses need a custom freight quote.

How is a kit delivered?

Freight shipments are delivered curbside by a tractor-trailer. Please confirm a truck can reach the address and that someone can receive several hundred pounds of equipment. A liftgate or inside delivery can be added before dispatch for a fee.

What if the crate arrives damaged?

Note the damage on the carrier delivery receipt before signing and photograph the crate. Report damage within 48 hours and missing items within 5 business days. We file the freight claim and ship replacements for verified damage at no cost.

Who is responsible once it is delivered?

Title and risk pass to you on delivery, which is why the inspection at the curb matters. Keep the crate until the system is installed, and store panels upright and dry if installation is more than a few weeks away.

04 — Installation

Permits, inspection and interconnection

This is the part most kit sellers skip. A system only earns its first kilowatt-hour after the utility grants permission to operate.

Can I install a kit myself?

In many jurisdictions a homeowner may install their own system, but the electrical interconnection and the permit normally require a licensed electrician, and the local authority having jurisdiction decides. Confirm before you order, and we will send the documentation your electrician needs.

Do you install the system, or do I find an installer?

We sell equipment kits. In some regions we can introduce a licensed installation partner; where we cannot, we help you brief your own electrician and review the design. Ask us what is available at your address before ordering.

What permits and approvals will I need?

Usually a building or electrical permit from the local authority, a utility interconnection application, and in some areas HOA or historic approval. Older roofs may need a structural review. Timelines typically run from one to six weeks depending on the jurisdiction.

What inspection happens at the end?

The local authority inspects the electrical work, then the utility grants permission to operate. Do not energise the system before that permission arrives; doing so can void the interconnection agreement and your insurance cover.

Will I need an electrical panel upgrade?

Possibly. The main breaker and busbar rating, not just spare spaces, decide whether a solar breaker can be added. Your electrician confirms this on site. A panel upgrade is typically $1,500 to $4,000 and is never included in a kit price.

05 — Money

Payment, financing and incentives

We take card, ACH and bank transfer, and we are direct about what the 2026 tax rules do and do not allow.

How can I pay for a kit?

No payment is taken on this website. Send your list for review; we confirm equipment, freight, duties and sales tax, then issue an itemized invoice payable by card, ACH or wire. We do not accept cryptocurrency. Financing is available through a third-party lender.

What financing terms are available?

Terms from 60 to 144 months for qualifying buyers. Rates and approval are set by the lender, not by us, and the Estimator on the financing page shows an illustrative payment you can compare against a cash price.

Is there still a federal solar tax credit in 2026?

Not for homeowner-owned systems. The Section 25D residential credit does not apply to expenditures after December 31, 2025, and the completion date is what counts. State, local and utility programs may still apply. This is general information, not tax advice.

Can I cancel after ordering?

Before dispatch, yes, for a full refund of the equipment price. Once a kit has been crated or shipped, the return terms apply. Custom-designed and special-order systems cannot be cancelled after production begins.

06 — After the sale

Warranty, returns and support

Coverage is 25 years on performance, 12 on product and 10 on workmanship. Here is how claims and returns actually work.

What warranty comes with a kit?

Warranty coverage is set by each manufacturer; the exact period and claim process for the model are confirmed in your quote before payment. Installation workmanship is your licensed installer responsibility unless a written quote says otherwise.

Can I return a kit?

Unused, undamaged equipment in its original packaging can be returned within 30 days with authorisation. Return freight is your responsibility unless the item was defective or incorrectly shipped, a restocking fee of up to 15% may apply, and panels, batteries and custom-cut racking are non-returnable once opened.

How do I get help after delivery?

Call or email during business hours and we reply within 2 business hours. Have your order number and the serial numbers from the panels and inverter ready for anything warranty-related.

Does the kit include monitoring?

Most string inverters include a monitoring app and a Wi-Fi or cellular dongle; check the specification on the kit page. We help you commission it on your first support call.

Read the full warranty terms

Still have a Question?

Send it with your address and three months of electric bills. You will get a written answer and, if a kit fits, a quote that separates equipment from labour, freight and permits.